Recommended Torque

Widebody Grip Screws : 25 in/lbs

Trigger Guard Screws : 5 in/lbs

 

For each installation, ensure that each screw and bushing is clean, old locktite is removed from the threads, and is degreased with brake cleaner or etc. Apply Loctite 243 (Blue) to each screw and install to the above torque specs. If desired, one side of the trigger guard screw assembly may be installed with Loctite 262 (Red). Do not use too much so there is excess that could touch the screw from the other side or you may seize the screws into the trigger guard bushing and be unable to remove them.

The should be side to side play in the front trigger guard bushing assembly when installed. The screws bottom out on the bushing, not the grip.